Cylinder Cyclone Features

The ultimate all-in-one machine for disassembling, reassembling, and pressure-testing cylinders.

AccuraTorque Head

Model CC-2050 provides up to 50,000 ft-lb for loosening or 37,550 ft-lb for tightening cylinder nuts.
Model CC-2060 provides 60,000 ft-lb loosening and 50,000 ft-lb tightening
Infinitely adjustable torque from 0-60,000 ft-lbs
Bi-directional face plate rotation through full torque range
Remotely operated full length travel. 0-30 feet per minute and 0-20,000 ft-lbs of push and pull.
Remotely operated bi-directional rotation 0-30 rpm
Rapidly switch between operations with quick change tooling.
Reassemble cylinders to manufacturer's specs with complete confidence
Automatic tool plate safety stops
Centerline shifted 2" towards the operator for enhanced useability

Sky Hook

Overhead crane rail with rolling chain hoist with a 3-ton combined capacity
Center-lined for perfect assembly and disassembly
Integral part of the Cylinder Cyclone making alignment a simple task
Fitted with an overload stop switch to maintain safe operation

Digital Display

Digital touchscreen display
Direct readout of torque in ft/lbs or Nm, push/pull force in pounds or newtons, and pressure test in PSI and bar
Provides job tracking/timing for rapid payback on machine
Provides diagnostics for the bench

Large Tooling Selection

Specifically engineered for the Cylinder Cyclone bench
Tooling can be purchased individually or in one of 4 different packages at significant discounts
Custom tooling available upon request

Center Pipe Construction

Carries out all operations in one stable, simple unit
All pressure and torque forces contained within one machine eliminating the need to pour a special concrete floor. Just set on any level surface.
Three oil reserves provided: waste oil (250 gallon capacity), main machine system (25 gallon), and pressure test system (55 gallon)

Pressure_testing.jpeg-ezgif.com-webp-to-jpg-converter

Pressure Test System

6 test port locations spread along the front of the machine
Test resealed cylinders before removing from the bench
Purge function for reclaiming pressure test oil
Ability to detect internal leaks by using on screen graph
Pressure test from 0-4000 PSI.

Hydraulic System

Two completely separate systems to prevent oil contamination
Each system filtered with 10 micron hydraulic filters
Main system powered by 20 GPM variable displacement US made piston pump
Pressure test system powered by 15 gpm gear pump with variable pressure control from 0-4,000 PSI
Equipped with low oil lights and alarm system

Remote Control

Wireless remote enables safe machine operation from a distance:
- Machine start/stop and E-stop
- Rapid traverse for rotation and linear travel
- Clockwise/Counter clockwise rotation
- Linear travel or torque head push/pull
- Increase/decrease on linear travel and torque force
- Pressure test for extend/retract
- Purge and pressure increase for Pressure test system

Waste Oil Collection & Disposal

Drain pans slope toward the center of the unit, funneling waste oil into the large reservoir
Removable screen prevents tools and hardware from disappearing
Integrated waste oil discharge system
Way rails sloped at 5 degrees to direct oil splashes back to drainpan

Customer Printout (optional equipment)

Record and printout loosening/tightening torque values, pressure test values, pressure test graph

Large Tailstock (optional equipment)

Handles large cylinder with rod sizes up to 15"
Removable insert to handle both large and small cylinders

Extend-a-clone (optional equipment)

12' and 24' bench extensions
Easily bolt onto the end of existing bench
Expanded waste oil capacity
Extended overhead crane beam

Efficient | Safe | Strong | Feature-Rich

Get A Free Quote

Read more about the Cylinder Cyclone unique features...

Cylinder Cylone is a cylinder repair bench designed and built by cylinder repair technicians for the serious cylinder servicing shops. With the key focus points being safety, easy user friendly operations, quick tooling and parts change out, swift cylinder disassembly, cylinder assembly, and cylinder testing, all in one free standing cylinder rebuilding machine with an amazing ROI.

Center Pipe construction

The 20” center pipe provides outstanding ridgidity, making Cylinder Cyclone the only free standing cylinder bench on the market. Most cylinder repair machines on the market are a skeleton frame with little structural integrity, thus requiring you to cut out a section of your shop floor and install a special engineered, reinforced concrete pad to bolt the machine to. Not so with Cylinder Cyclone. Simply set on any level surface, plug into power and air, and you are ready to start your cylinder remanufacturing business. The center pipe doubles as oil reservoirs. Avoid messy cylinder rebuilding with a Cylinder Cyclone where all the waste oil simply drains into our full-length drain pan and into the 250 gallon center waste oil tank. The same pipe is also home for both the pressure test oil and system oil, all in three separate integrated reservoirs.

Sky Hook

The sky hook is an overhead rail that provides crane service for handling heavy cylinders while in the bench. It has a rolling chain hoist system that can handle cylinders up to 3 tons in weight, while simultaneously giving precise movement making one-man set ups a breeze. The sky hook is perfectly aligned over the center point of the AccuraTorque Head and the tailstock, so the cylinders are held exactly where you need them for effortless disassembly and reassembly operations. This feature greatly enhances the safety of the Cylinder Cyclone. We expect this machine to give you many hours of secure service after you have acquainted yourself with the simple procedures of operation.

Hydraulic Pumps

We know hydraulics and have installed top-of-the-line pumps that will serve your needs reliably for many years. There are two separate pumps each with it’s own 10 micron filtration system. The first pump is for all the main functions on the Cylinder Cyclone. The second pump is for Pressure testing cylinders after they have been rebuilt. This two pump design will provide your hydraulic cylinder repair shop with years of reliable service without fear of cross contamination with dirty oil.

Electronic Controls

Intuitive controls on a machine are essential components for safety as well as for accuracy and precision. We use wireless electronic controls allowing the operator to monitor and control the Cylinder Cyclone from a safe distance. There is also an integrated touchscreen, displaying relevant torque and pressure readouts, as well as being used for onboard diagnostics. An optional printout feature is available, allowing exact details about the job to be recorded and printed out for client satisfaction.

Pressure Test System

This feature enables the technician to properly test rebuilt cylinders before removing them from the Cylinder Cyclone. A purge function is built into the control allowing the pressure test oil to be returned to the Cylinder Cyclone before the cylinder leaves.

Specialized tooling

Because we know our machine, and we know the cylinder rebuilding industry, we put together a complete array of service tooling for the Cylinder Cyclone. These tools are thoughtfully engineered to serve your needs in repairing hydraulic cylinders. We are happy to build custom tooling for any specialty project.

Why Choose Cylinder Cyclone?

Knowledgeable sales team that matches your shop or service department with the right tooling kits, pressure test fittings, etc.
Service department who answers questions quickly
Set up and on-site training is available
Financing available

Get A Free Quote